Chinese Factory Price PPGI Coil Hot Immersion Prepainted Galvanizada Steel Sheet in Rolls

• After-sales Service: Engineer Online Guidance
• Warranty: Until Product Being Installed
• Standard: ASTM, JIS, GB, AISI, DIN, BS
• Certification: ISO, RoHS, IBR
• Surface Treatment: Galvanized
• Technique: Cold Rolled
• Model NO.: 0.12-1.2mm*600-1250mm
• Application: Boiler Plate
• Edge: Slit edge
• Stock: Stock
• Color: Ral Colors or as Your Request
• Width: 600-1200mm
• Tolerance of Width: +-2mm
• Thickness: 0.12~1.2mm
• Tolerance of Thickness: +-0.02mm
• Base Material: Hot DIP Glavanised/Galvalume Steel Coil
• Zinc Coating: Z30-275G/M2, Az30-180G/M2
• Coil ID: 508mm/610mm
• Top Paint Layer: 15-25 Micron
• Back Paint Layer: 5-25micron
• Paint Type: PE,PVDF,HDP,SMP
• Coating Structure: 2/2 or 2/1
• Coil Weight: Usually 3~5 Tons
• Lifetime: 15-20 Years
• Steel Grade: Dx51d,Dx52D,G550,SPCC,Cglcc,Sgch
• Transport Package: Standard Seaworthy Export Packing or as Required
• Specification: EN10142, EN10346, EN10169, JIS3302, GB/T12754,
• Trademark: tiga
• Origin: China
• HS Code: 72107010
• Production Capacity: 6000mt/Week

Product Description

1. Hot Immersion Prepainted Galvanizada Sheet Rolls Without Alloy Simple Introduction
It is also known as Color coated steel coil, PPGI, typically with a hot dip zinc coated steel substrate. Painted
Galvanized Steel Coil refers to factory pre-painted zinc coated steel, where the steel is painted before forming.
It is used galvanized steel or the galvalume steel as the base materials, after surface pretreatment, such as
chemical degreasing and conversion treatment, next passed to be painted and baked, then we get the final
products.

2. Hot Immersion Prepainted Galvanizada Sheet Rolls Without Alloy Main Usage
It is used as building materials(ceiling, metal roof tile) machinery parts (electrically controlled cabinets, road
maintain board, etc, so it is mainly used in advertising Industry, construction, household appliances industry,
electrical industry, furniture industry and transportation.

3. Hot Immersion Prepainted Galvanizada Sheet Rolls Without Alloy Quality Control
Strict procurement process---skillful technical workers---final products inspection(resistance to corrosion,
salt spray test, exposure test, machinability, thermal resistance)---standard packing

4. Hot Immersion Prepainted Galvanizada Sheet Rolls Without Alloy Package Materials
1) 4 eye bands and 4 circumferential bands in steel 
2) galvanized metal fluted rings on inner and outer edges 
3) galvanized metal & waterproof paper wall protection disk 
4) galvanized metal & waterproof paper around circumference

5. Hot Immersion Prepainted Galvanizada Sheet Rolls Without Alloy Types and Function
According to different environment and uses, we can choose the different appropriate resin coating.
1)Polyester(PE)
Good formability and adhesion, color is rich and various, superior durability in the outdoor, Good chemical
resistance and low cost.
2)Silicon modified polyester(SMP)
Good wear resistance and heat resistance, as well as good exterior durability and resistance to pulverization,
medium cost.
3)High durability polyester(HDP)
Anti-ultraviolet and excellent color retention, excellent resistance to pulverization, good adhesion, color is rich,
good cost performance.
4)Polyvinylidene fluoride(PVDF)
Strong performance of anti-ultraviolet, can stand against strong change of weather for long time and erosion
for many kinds of chemical medium, excellent solvent resistance, dirty resistance, color is limited and high cost.

6. Hot Immersion Prepainted Galvanizada Sheet Rolls Without Alloy Coating Capabilities
1) Precision painted graphics (linear and non-linear) and embossing
2) Painted coil up to 36".
3) Any color can be supplied at any gloss level.
4) Small (10, 000 lbs. ) or large production runs.
5) Single or multiple coatings

7. Why choose us?
1. CUS-STEEL advantages: We have two production line of color coated steel coil and two lines for the galvanized
    steel coil, total yearly output is about 500000mt. Also we have 56 professional salesperson from three international
    sales department, a group of technical engineers and skillful quality control inspector.
2. Special technology support: We have two production line of pre-painted steel coil and two lines for the galvanized
    steel coil, total yearly output is about 500000mt. In order to meet our customers new requirements, We also can
    manufacture the special products,such as Printed, Filmed, Pressed, Matte steel coil and the full hard G550 galvanized
    Steel and galvalume steel.
3. Conform the international quality standard: All products for export, according to the International quality standard
    of Europe, Japan, Russia& America to produce, for example, EN10142, JIS3302, JISG3312, ASTMA755M, EN10147,
    GB/T12754, etc.
 

Standard	EN10142 ,JIS G3302,GB/T-12754-2006,ASTM,DIN
Grade	DX51D,SGCC,SPCC,SGHC
Thickness	0.12-1.2mm
Width	600-1250mm
Base metal	Hot Dip Galvanized steel coils, Hot Dip Galvalume steel coils
Zinc coating	Z30-275g/sm, AZ30-180g/sm
Coil ID	508 or 610mm
Coating thickness	Top:15-25um back:5-25um
Color options	Ral Number or according to your requirement
Treatment	Chromate treatment /chromate-free treatment /untreated unoile/oiled
Application	Structural use,roofing, commercial use, household appliance, industry, family
Special Application	Wear resistant steel, high- strength - steel plate
Package	Standard exporting seaworthy packing.
Delvery time	5-7 days
Shipment	Container or Bulk

Raw Materials

Hot Dip Galvalume Steel Coils






Ral Color Card
Color can be made as per Ral color card or the samples.
product application

we have exported to more than 70 countries all over the world

quality test

packing and loading