1. Galvanized corrugated steel roofing tile introduction
It is one of the most corrosion resistant corrugated materials offered in the architectural roofing
and siding panel market. Unlike normal galvanizing, this metal material is an actual combination
of aluminum and zinc to provide excellent protection
2. Galvanized corrugated steel roofing tile application scope
Most commonly used for commercial, agricultural, and industrial purposes, however, it is now also
being recognized as an excellent form of residential roofing. Corrugated steel sheet is also known
as sinusoidal, corrugated iron or wriggly tin
3. Galvanized corrugated steel roofing tile main feature
1) Combine the excellent barrier corrosion protection of aluminum with galvanic protection of zinc
2) Preferred product for long-term resistance to atmospheric corrosion
3) Superior corrosion resistance
4) Easy to install, high strength and lower costs
5) Widely used as walls or roofs for factories, warehouses, garages, exhibition centers
4. Galvanized corrugated steel roofing tile installation tip
1) Prepare roof surface by removing old roofing,rotten wood,adding roofing felt to entire surface
2) Calculate the number of sheets of corrugated metal needed. Divide the area of your roof by
the size of the sheets you will be using
3) Place your first metal sheet in a corner of the roof, flush against the surface
4) Nail in the first metal sheet to the wood of the roof
5) Place the second metal sheet alongside the first with an overlap of 3 to 4 inches (10 cm)
6) Nail the second metal sheet to the roof
5. Tools you'll need when install galvanized corrugated steel roofing tile
1)Sheets of corrugated metal 2)Metal ridge caps 3)Roofing felt (if needed) 4)Nails
5)Hex screws 6)Washers 7)Hammer 8)Drill
Product |
Galvanized Corrugated Steel Roofing Tile |
Base material |
Hot dipped galvanized steel sheet
Hot dipped galvalume steel sheet |
Material Grade |
SGCC / SGCH / DX51D+Z / DX51D+AZ, etc |
Thickness |
0.15-0.60mm |
Width before corrugation |
1000mm , 1200mm |
Tolerance |
Thickness: +/-0.02mm
Width:+/-2mm |
Zinc-coating |
60g/m2-275g/m2(G30-G60). |
Technique |
Raw material: Hot rolled steel coil --> Cold rolled_>hot dipped galvanized
_>corrugated |
Terms |
Raw material width 762mm, after corrugated width 665mm: 9 waves.
Raw material width 914mm ,after corrugated width 800mm:11 waves.
Raw material width 1000mm, after corrugated 890mm or 900mm :12 or
14 waves. |
Feature |
Roofing Steel Sheet have excellent performance of decoration,
corrosion resistance etc. |
Export package |
Waterproof paper, galvanized steel covered and steel strip packed |