1. Color Coated Steel Roofing Tile brief description
1) It is formed by cold roll forming machine, using color steel coil or aluminum steel as the base materials
2) Featured with easy installation, high strength, more economic, (low lost )
3) widely use as the wall or roof of factory, warehouse, garage, exhibition center, cinema etc
2. Color Coated Steel Roofing Tile raw material
Galvanized steel, Galvalume Steel, Galvalume Pre-painted sheet and aluminium sheet
3. Color Coated Steel Roofing Tile main feature
1) Can prevent roof from the damage of excessive moisture and strong winds
2) Be attached to wood or metal trusses with steel nails or screws that have character of heat-resisting, corrosion resisting
3) Light, strong, corrosion-resistant, and easily transported
4) High percentage of recycled material, can reach 90%
4. Color Coated Steel Roofing Tile packing detail
1) Water proof paper covered with steel sheet on top of products; Bundle by steel strip with iron pallet
2) Water proof paper covered by whole steel sheet; Bundle by steel strip with iron pallet
5. Color Coated Steel Roofing Tile installation instruction
1) Prepare roof surface by removing any old roofing,any rotten wood,adding roofing felt to entire surface
2) Calculate the number of colorbond steel profile sheet needed
3) Place your first metal sheet in a corner of the roof, flush against the surface
4) Nail in the first metal sheet to the wood of the roof. You should use about 20 nails per sheet
5) Place the second metal sheet along side the first with an overlap of 3 to 4 inches (or 10 cm)
Secure the sheets together using hex screws and washers
6) Nail the second metal sheet to the roof
Name |
Color Coated Steel Roofing Tile |
NDARD |
GB/T-12754: 2006, JIS3302, EN 10142, ASTM A653, JIS G3302,
SGCC/SGCH, GB/T2518, European Standard, ASTM A792, JIS G3321 |
BASE PLATE |
Cold rolled steel sheet, hot dipped zinc coated steel sheet
hot dipped A-Z coated steel sheet |
EQUIPMENT |
Double coating double baking; three coating three painting |
CAPACITY |
5000Mt/week |
SIZE |
Thickness 0.18mm_2mm, width 40mm_1250mm |
ZINC COATING |
40g-275g |
PAINT THICKNESS |
Top:20+-5um, back:5-7um |
COIL WGT |
3Mt - 8Mt |
COIL ID |
φ508mm,φ610mm |
BASE SHEET |
Cold rolled steel sheet, hot dipped zinc coated steel sheet
(small, regular or zero spangle), hot dipped A-Z coated steel sheet |
SURFACE PAINT |
EP, PE, HDP, SMP, PVDF |
COLOR SERIES |
RAL color number series |