Printed Wooden PPGI /Flower Grained Colorful Prepainted Galvanized Steel Coil

• Standard: ASTM, JIS, GB, AISI, DIN, BS
• Certification: ISO, RoHS, IBR
• Surface Treatment: Coated
• Technique: Cold Rolled
• Application: Decorations, Heat Sink, Transportation Tools, Door
• Edge: Mill
• Model NO.: TIGA-A3003
• Stock: Not Stock
• Surface Treatmtne: Plain,Stucco/Embossed,Diamond
• Surface Paint: PE/PVDF
• Thickness: 0.12-1.5mm
• Width: 20-1250mm
• Uasge: Gutter/Shutter/Ceiling/Roofing/Channel
• Certificate: ISO9001,ISO14001
• Weight/Coil: 1-8ton
• Inner Diameter: 508mm, 610mm
• Delivery Time: 15-25working Days After Receiving Deposit
• Transport Package: Export Seaworthy Package
• Specification: SGS
• Trademark: TIGA
• Origin: China
• HS Code: 760612
• Production Capacity: 2000 Ton Per Year

Product Description

1. Prduction Description

Printed PPGI is prepared by being coated with a layer of paint and baked pattern is prined
our using the gravure technologies, then a layer of clear lacquer is coated and after being
baked again, printed PPGI is obtained.


2. Quanlity control
 

Prior to coating mainly has the following several inspection process control:

(1) check the strip surface treatment before it through the test and analysis of surface
defects and the shape of the.

(2)check the effect of the metal surface degreasing cleaning inspection.

(3) check the strip surface chemical liquid film thickness is in accordance with the provisions
of the national or industrial standards.

(4) check whether it meets the requirements of steel strip surface coating substrate in the
surface temperature, humidity areas.

(5) check models, specifications, paint and thinning of the viscosity before into the machine.

(6) check the coating chamber temperature.
 

Coating construction process control mainly has the following several inspection process:

(1) the wet film thickness of bottom, paint coatings.

(2) whether there is leakage with or without continuous absence of wet film.

(3) the head of each roll coating and production line speed ratio is in accordance with the
process requirement.

(4) the drying temperature curing furnace sections.
 

Control after coating has the following several major inspection:

(1) surface state inspection coating, including whether there are surface defects, gloss
and color etc..

(2) the national industry standard or check the total dry film thickness can reach the
design requirements

(3) the adhesion and coating inspection on a substrate.

(4) according to other performance quality standard inspection coating.
 

Commodity	Printed Wooden Prepainted steel coil
Width	600-1250mm
Thickness	0.13-4mm
Standard	JIS G 3302-1998, ASTMA653M, GB/T 2518, Q/CHG3-2005, EN 10142,  DX51D,ENG10142,SGCD(DX52D+Z)
MOQ	5 Tons
Technique	Hot dipped galvanized, alu-zinc coating, pre-painted, color coating, etc
Zinc coating	40-275g/m2
Tolerance	Thickness: +/-0.02mm
	Width: +/-2mm
Surface processing	Regular spangle, minimized spangle, zero spangle, bright spangle, etc
Application	Steel structure, building exterior application, building material, roofing household, application,  tube making,  etc…
Product feature	Good performance, high precise, high straightness, high evenness and surface finishing,  uniform thickness,easy for coating process, high tensile strength, high pressing property and low yield point
Package	Wrapped with waterproof paper inside,  tied by steel strip, supported by pallet, then loaded in container or according to customer' requirements
Delivery	Normally 7-10 days after get deposits or according to the quantity