1.Suede Surface Steel Coil Simple Description
It is widely preferred for roofs and wall cladding. Our company designs these profile sheets
using authentic stainless steel metal, which has strong tensile strength.also known as the
pre-painted galvanized steel coil, color steel coil etc, typically with a hot dip zinc coated
steel substrate. It refers to factory pre-painted zinc coated steel, where the steel is painted
before forming
2.Suede Surface Steel Coil Common Application
Roofing, Walling, Cladding, Siding, Automotive (Non-exposed Items) Construction Ducting
Cooler Solar Heating Panel Structural Scaffolding Brooder Reflector
3. Suede Surface Steel Coil Quality Control
Strict procurement process---skillful technical workers---final products inspection (resistance
to corrosion, salt spray test, exposure test, machinability, thermal resistance)---standard packing
4. Suede Surface Steel Coil Package Materials
1) Each bare coil to be securely tied with two bands through the eye of coil and one circumferential
2) The contact points of these bands on the coil edge to be protect with edge protectors
3) Coil be wrapped with water proof /resistant paper, it to be properly and completely metal wrapped
4) Wooden and iron pallet can be used or as your requirements
5.Suede Surface Steel Coil Advantages
has the appearance,bright color ,high strength ,good corrosion resistance,easy processing and other advantages ,widely used in the construction industry,electrical appliances ,decoration and other fields,
such as : modern garden design,large industrial workshop modern large airport ,large gymnasium,
prefabricating heat insulation sandwich board .has become a new material to replace steel
spray .
Base Material |
Hot dip galvanized steel sheet(HDG) |
Hot dip AL-ZINC coated steel sheet(55% AL-ZN) |
Zinc-iron-alloy steel sheet( ZF) |
Coating mass |
Zinc:60-275gm2 AL-ZN:60-180gm2 |
Thickness |
0.12-1.5mm |
Tolerance of thickness |
-0.03-+0.01mm |
Width |
600-1250mm |
ID |
610mm,508mm |
Quality Standard |
EN10142,EN10326,EN10169,JIS3302,ASTMA755M,GB/T12754 |
Steel Grades |
DX51D,DX52D,DX53D,S220GD,S250GD,SGCC |
Type of coating |
PE,PVDF,HDP,SMP |
Coating structure
(Top surface/bottom surface) |
2/2 (Double coated/ double coated) |
2/1 ( Double coated/ single coated) |
(Top Paint Layer) |
20-25μm |
(Back Paint Layer) |
7-12μm |
Glossiness |
35-65 ±5° |
Weight of coil |
1-8T |
Package Method |
(Vertical packing) ( Horizontal packing) |