1. Galvanized steel coil simple introduction: Galvanized steel coil means that hot roll steel coils has gone through a chemical process. To keep it from corroding, so this protective metal, zinc layers, does not get rusty as easily. The coating also gives the steel a more durable, hard to scratch finish.
2. Galvanized steel coil technical processing:
1)Uncoiled and sheared
2)Cleaned using a caustic aolution, which can remove oil/grease, dirt, and paint
3)Entry looper to revised and then annealing furnace
4)Steel is dipped into the molten zinc bath
5)Cooled in a quench tank to reduce its temperature
6)Post treatment and crimper
3. Galvanized steel coil quanlity control: Strict procurement process---skillful technical workers---final products inspection(resistance to corrosion, salt spray test, exposure test, machinability, thermal resistance)----standard packing
4. Galvanized steel coil advantages:
1)Zinc coating has good adhesion
2)Resistant to corrosive4 factors
3)High strength&quality
4)Strict quality control system
5)Standard export sea-worthy packing
5. Why choose us?
1. CUS-STEEL advantages: We have two production line of PPGI and two lines for the galvanized steel coil, total yearly output is about 500000mt. Also we have almost 60 professional salesperson from three international sales departments, a group of technical engineers and skillful quality control inspector.
2. Special technology support: We have two production line of pre-painted steel coil and two lines for the galvanized steel coil, total yearly output is about 500000mt. In order to meet our customers new requirements, we also can manufacture the special products, such as printed, filmed, pressed, matte steel coil and the full hard G550 Galvanized steel and galvalume steel.
3. Confirm the international quality standard: All products for export, according to the International quality standard of Europe, Japan, Russia and America to produce.
| Base Material |
HDG, AL-ZN, ZF |
| Zinc coating |
Zinc: 60-275g/m2, AL-ZN: 60-180g/m2 |
| Thickness |
0.12mm-1.5mm |
| Tolerance of thickness |
-0.03-+0.01mm |
| Width |
20-600mm, 600-1500mm |
| Quanlity Standard |
EN10142, EN10346, EN10169,
JIS3302, ASTMA755M, GB/T12754 |
| Steel Grades |
DX51D, DX52D, DX53D, S220GD, S250GD, S350GD, SGCC |
| Type of paint |
PE; PVDF; HDP; SMP |
| Surface treatment |
galvanized / galvalume steel sheets |
| Application |
Building industry ,structural use, roofing, commercial use,
household appliance,industry facilities,office buildings |
Audited Supplier 
){kind=link}