| Standard: | ASTM, JIS, GB, AISI, DIN, BS |
|---|---|
| Certification: | ISO, RoHS, IBR |
| Surface Treatment: | Galvanized |
| Technique: | Cold Rolled |
| Application: | Boiler Plate |
| Edge: | Slit edge |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Pre painted galvanized steel coils (PPGI)
|
CONTENTS |
PREPAINTED GALVANIZED - PPGI |
PREPAINTED GALVALUME - PPGL |
|
BASE METAL |
GALVANIZED |
GALVALUME / ALUZINC |
|
STANDARDS |
JIS G 3312-CGCC, CGC340-570, (G550), |
JIS G 3312-CGLCC, CGLC340-570, (G550), |
|
ASTM A -755M CS-B, SS255-SS550 |
ASTM A -755M CS-B, SS255-SS550 |
|
|
THICKNESS |
0.13~2.0 mm |
0.13~2.0 mm |
|
Width |
750~1500 mm |
750~1500 mm |
|
Coil ID |
508/610 mm |
508/610 mm |
|
Substrate |
Soft, Medium, Hard |
Soft, Medium, Hard |
|
Coating Mass |
Z 40-275 (g/m2) |
AZ 40-150 (g/m2) |
|
Paint Systems |
Primers: Epoxy, PU |
Primers: Epoxy, PU |
|
Top Coating: |
Top Coating: |
|
|
Polyester (RMP/PE) |
Polyester (RMP/PE) |
|
|
Silicon Modified Polyester (SMP) |
Silicon Modified Polyester (SMP) |
|
|
Poly Vinyl Di Flouride (PVDF) |
Poly Vinyl Di Flouride (PVDF) |
|
|
Back Coating: Epoxy, Polyester, PU |
Back Coating: Epoxy, Polyester, PU |
|
|
Coating |
20 - 50 Microns |
20 - 50 Microns |
|
Colours |
As Per RAL Chart/Customer requirements. |
As Per RAL Chart/Customer requirements. |
|
Surface Finishes |
Glossy and Matte |
Glossy and Matte |
|
Cut to length |
200mm-5000mm |
200mm-5000mm |
|
Capacity |
1,500,000.00 Ton / year |
1,500,000.00 Ton / year |
|
Packing |
Sea Worthy Export Packaging |
Sea Worthy Export Packaging |
|
Loading Port |
Tianjin Port/Jingtang Port/Shanghai Port |
Tianjin Port/Jingtang Port/Shanghai Port |
Standard |
Steel Grades | Galvalume Steel Sheet application |
| GB/T 2518-2004 | 01 | Common commercial application |
| 02 | For mechanical engagement | |
| 03 | For stamping | |
| 04 | For deep drawing | |
| 220,250,280,320,350 | For structural components | |
| JIS G 3302-1998 | SGCC | Common application |
| SGCD1 | For stamping | |
| SGCD2 | For deep drawing | |
| DIN EN 10142-2000 | DX51D+Z | For common application and mechanical engagement |
| DX52D+Z | For stamping | |
| DX53D+Z | For deep drawing | |
| DIN EN 10147-2000 | S220GD+Z | For structural components |
| S250GD+Z | ||
| S280GD+Z | ||
| S320GD+Z | ||
| S350GD+Z |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}