1. Galvanized Corrugated Iron Sheet for Roofing introduction
Galvanized Corrugated Metal Roof Sheet is formed by cold roll forming machine,using galvanized
steel sheet or aluminum steel as the base materials. Galvanized corrugated steel roofing sheet is
featured with easy installation, high strength, more economic, (low lost)
2. Galvanized Corrugated Iron Sheet for Roofing raw materials
Galvanized steel, Galvalume Steel, Galvalume Pre-painted sheet and aluminium sheet
3. Galvanized Corrugated Iron Sheet for Roofing installation tips:
1) Workers must be equipped with necessary safety facilities(gloves, safety helmet, safety belt)
2) Worker is professional, who has the related certificate
3) Skeleton should be installed stably
4) Workers try to stand in the middle of the tile if need, avoiding avoid step on the edge of the tile
5) Please avoid the bad weather when install the prefab house
4 Tools you'll need when install Galvanized Corrugated Iron Sheet for Roofing
1)Sheets of corrugated metal 2)Metal ridge caps 3)Roofing felt (if needed) 4)Nails
5)Hex screws 6)Washers 7)Hammer 8)Drill
| name |
Corrugated GI Roofing Sheets |
| standard |
0.12-1.0*750-1250mm*C |
| thickness |
0.12-1.0mm |
| width before corrugated |
750-1250mm |
| width after corrugated |
665-920mm |
| length |
Any length is ok |
| wave depth |
16(+/-2mm) |
| zinc coating |
40--275g/m2 |
| Characteristic |
High strength, heat-resistent, anti-oxidation,big&small or regular spangle,chromated material to pass 180 degree bending test without
Zinc peel off and no stress creases when bending on surface |
| Packing |
Export standard seaworthy packing |
Audited Supplier 
){kind=link}
){kind=link}