Standard: | ASTM, JIS, GB, AISI |
---|---|
Certification: | ISO, RoHS, IBR |
Surface Treatment: | Coated |
Technique: | Cold Rolled |
Application: | Food Cans |
Edge: | Slit edge |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Tinplate Sheet
We are the professional company who can produce the high quality and competive price tinplate , Our tinplate
sheet details as follows:
1. Technical standard: BS EN 10202, DIN EN 10203, GB/T2520 , JIS G3303
2. Steel type: MR, SPCC
3. Thickness: 0.15 - 0.45 mm
4. Roll width: 300 - 1050 mm Coil ID: 508 mm
5. Cut length: as customer requirement
6. Tin coating weight:2.8/2.8, 2.8/5.6, 5.6/5.6 gr/m² or according to your requirement.
7. Temper: T2-T5, DR7 DR8 DR9
8. Surface: Bright/Stone/Silver finish with passivation treatment; DOS oil
9. Packaging detail:
Thin plastic film, rust-proof paper, metal cover, metal corner, metal band, wooden skid.
Standard for Temper
Tinplate specifications | |||
Steel Type | SPCC, MR | ||
Temper(BA&CA) | T1~T5 | ||
Coating | 1.1~11.2g/m2 | ||
Thickness and tolerance | 0.15~0.50mm(Tolerance: _+0.01 mm) | ||
Width & tolerance | 300~1000mm (Tolerance: 0~3mm) | ||
Cut length & tolerance | 450~``50mm (Tolerance: 0~3mm ) | ||
Coil inside diameter | 420/508mm | ||
Coil Weight | 3~10 MT | ||
Passivation | 311 | ||
Oiling | DOS | ||
Surface Finish | Bright, Stone, Silver, Matte | ||
Packaging | Seaworthy Standard with wooden pallet | ||
Standards Available | GB/T2520, JIS G3303, ASTM A623M & EN10202 | ||
Special specitications are available on request. |
Tin coating weight | |||
Type | Designation of tin coating weight |
Min.average tin coating weight(g/m2) |
Former Coating Designation |
Equal tin coating | 1.4/1.4 | 1.2/1.2 | #15 |
2.2/2.2 | 2.0/2.0 | #20 | |
2.8/2.8 | 2.45/2.45 | #25 | |
5.6/5.6 | 5.05/5.05 | #50 | |
8.4/8.4 | 7.55/7.55 | #75 | |
11.2/11.2 | 10.1/10.1 | #100 | |
Differentially Coating | 1.4/2.8 | 1.2/2.45 | #15/25 |
2.2/2.8 | 2.2/2.45 | #20/25 | |
2.8/5.6 | 2.45/5.05 | #25/50 | |
2.8/8.4 | 2.45/7.55 | #25/75 | |
2.8/11.2 | 2.45/10.1 | #25/100 | |
5.6/8.4 | 5.05/7.55 | #50/75 | |
5.6/11.2 | 5.05/10.1 | #50/100 | |
8.4/11.2 | 7.55/10.1 | #75/100 |
Surface finish | Nominal surface roughness (um Ra) | Characteristic | |
Bright finish | ≤Q0.35 | Glazed surface obtained after melting treatment of electrotinned smooth raw materail strip with extremely fine rubstone fingure by processing. |
|
Stone finish | 0.25~0.60 | Glazed surface obtained after melting treatment of electrotinned smooth raw materail stripfeaturing certain rubstone figures. |
|
Silver finish | 0.50~1.00 | Glazed surface obtained after melting treatment of electrotinned smooth raw material strip with rough matt furface. |
|
Matte finish | 0.80~2.50 | Matt surface of general matt raw material strip without melting treatment. |
Suppliers with verified business licenses